SOLID STATE DRIVE (SSD)
Bitbox 2.5 Inch SATA III Laptop/ Desktop Solid State Drive (SSD) Internal 1 TB
Our storage solutions are designed for high-performance applications, such as media streaming, data backup, and data analytics. They are built to provide fast and reliable access to data, ensuring that organizations can make quick and informed decisions based on the insights derived from their data.
Contact Us
Breathe new life into your PC
Product Highlights:
- High-speed performance
- Increased reliability and durability over traditional hard drives
- Increased performance for faster boot and application load times
- Warranty support *
Overview
Bitbox 2.5” SATA-III SSD which adopts MAS1102 SSD controller and YMTC X2-6070 3D QLC Nand Flash. It supports 4K LDPC ECC and RAID 5 ECC function to ensure full End-to-End data path protection that secures the data transmission between host system and NAND Flash.
The 2.5” SATA-III SSD’s capacity up to 2TB. It fully compliant with SATA 3.0 protocol, delivers stable and outstanding performance up to 550MB/s read performance but low power consumption. With it effectively reduces the booting time of operation system and consumes less power than hard disk drive (HDD),the SSD is optimal for PC’s boot drive and embedded system’s storage.
BITBOX 2.5 Inch SATA III SSD Internal (1 TB) SPECIFICATION
| Product Features | |
| Capacity | 1TB |
| Type flash built in | YMTC X2-6070 3D QLC NAND |
| Form Factor | 2.5” 7mm |
| HIPM/DIPM/DeviceSleep | Optional |
| Support | Hot-plug |
| Aspect Ratio | 16:09 |
| Supports Interface | 1-port 1.5/3.0/6.0Gbps SATA I/II/III |
| Feature set | SMART feature set and 48-bit Address feature set |
| Compatibility | Full SATA hard disk compatible |
| Data retention | JESD47 compliant |
| Algorithm support | Proprietary wear leveling algorithms |
| Compliance | RoHS, CE, FCC |
| Operating Voltage Requirement | Vcc = 5.0V ±5% |
| Operating System | Supported by all operating systems |
| Interface | SATA 6.0Gbps (SATA‐III) or SATA 3.0Gbps (SATA‐II) or SATA 1.5Gbps (SATA‐I) |
| Installation Requirements | System Hardware which supports SATA-II/SATA-III System Hardware includes SATA socket or transfer board |
| Physical Specifications | |
| Length | 99.70 ± 0.48 mm |
| Width | 69.80 ± 0.25 mm |
| Thickness | 7.00 + 0.20/ -0.50 mm |
| Environmental Specifications | |
| Commercial Grade | 0°C to +70°C |
| Storage Temperature | -45°C to +95°C |
| Humidity | 5% to ~98% RH (Non-condensing) |
| Operating Shock | 1500G at 0.5ms |
| Operating Vibration | 15G(7 to 2000Hz) |
| Operating Altitude | Operation: 120,000f |
